Roll Up! New Attachment Save Valuable Cleaning Time

Euromec's range of industrial scrubber driers is now available with a new low cost attachment, which is designed to improve cleaning efficiency. The new roller brush assembly can be fitted to both the "Mark" pedestrian and "Drive" ride-on models.

The roller brush is a powerful pre sweep unit. Mounted at the front of the machine it picks up loose debris from the floor before the scrubbing process. This enables scrubbing and sweeping in one pass, without the need for the area to firstly be cleaned with a vacuum cleaner. Cleaning times can be reduced by as much as forty per cent.

Euromec is a specialist supplier of cleaning equipment and offers a full range of sweepers and scrubber driers to suit most industrial cleaning applications. The companies scrubber drier range comprises three models:

The Mark walk-behind range features single, two disc or roller brush types and may also be fitted with special squeegees for the cleaning of different surfaces. Standard features of these scrubber driers include high capacity polythene solution and recovery tanks, suction motor, brush head, squeegee and anti foam device. The largest pedestrian model, Mark 682, gives an impressive 1800 square metres per hour cleaning capacity.

Drive is a new range of ride-on scrubber driers, able to cope with the most demanding of industrial and commercial cleaning applications. Available with either scrubbing rollers or discs, depending on the model, they all have impressive cleaning performances. Scrubbing widths vary from 800mm to1300mm with the Drive 952 having a theoretical hourly cleaning performance of 3,800 square metres.

Metro is a high performance ride-on scrubber drier that has a 6000 square metre per hour cleaning capacity, by virtue of a 1050mm cleaning width and large 270 litre solution tank. Rear wheel drive offers good traction on all surfaces and the drivers position over the front wheel ensures the machine is safe to use in the most crowded environments.